COMPLEMENTARY ACCESSORIES

MAQUINAS RELACIONADAS

FAQS

What power does the BULK 298 OFE-V19 pole chainsaw have and what voltage does it operate at?
It has a 750 W (1.01 hp) AC electric motor that connects to the network at 230 V and 50 Hz. It reaches maximum revolutions of 2700 min-1, sufficient for pruning tasks at height without depending on fuel.
How high and what diameter of branch can I cut with this pole?
The aluminum pole measures 1660 mm and allows working up to 4.2 m high depending on the height of the operator. The 10" (25 cm) bar with 3/8" low-profile, 40-link chain supports a maximum cutting diameter of 250 mm.
How is the chain lubricated and what is the capacity of the reservoir?
It incorporates an automatic grease pump with a 0.12 liter lubricant tank located in the machine head, which reduces the risk of drips and leaks. It also has an oil sight glass to check the level and refill when necessary.
What security systems does the BULK 298 OFE-V19 include?
It has an OVERLOAD SYSTEM overload protector, which stops the machine in the event of an electrical overload to protect the motor and the installation, and a safety switch to prevent accidental starts. The ergonomic handle with grippy coating improves balance and control during cutting at height.
Does it allow you to orient the head to reach branches at difficult angles?
Yes, the head is adjustable from 0º to 40º, which facilitates access to branches that are inaccessible from the ground. Chain adjustment is not tool-free, so you will need the corresponding wrench to tension it.